Tablet Plant

Fluid Bed Dryer

Rs 10 Lakh / Unit

Fluid Bed Dryer
  • Material Stainless Steel
  • Capacity 100- 50000 Kg/ hr
  • Automatic Grade Automatic
  • Design Customized
  • Voltage 415 V
  • Drying Temp 35 -80 deg C
Neelam Industries Fluid Bed Dryer - Granulator combines unique design with unmatched granulation performance. Our system has achieved worldwide success in both the Pharmaceutical and API industries.

Neelam Industries fluid bed dryer is the right combination of an accurate controlled air direction flow with the exact air speed to minimize the pressure drop in the fluid bed, to ensure a perfectly balanced process preventing granule agglomeration and allowing a uniform fast growing of the granule with low and controlled moisture residual.

The process unit is two piece made of SS-304 / 316 stainless steel. Through mixing of Dry powders, Agglomeration and Drying are carried out in one unit of Neelam Fluid Bed Dryer.

Salient Feature :
Process Unit
  • Uniform reproducibility of high quality batches
  • Easy scale up to higher capacity units
  • Easy to validate cleaning process
  • Homogenous granules
  • Gentle product handling
  • Pharmaceutical execution for cGMP compliance.
  • AC inverters for precise air flow controls of the fluidized bed dryer process
  • Execution for hazardous areas for organic solvent processing
  • Inflatable seals with interlocking device to control correct bowl position
  • In house R&D for your product development
  • Fluid bed granulators available in large variety of capacities
  • Perfect control of air turbulence in tangential way with very low pressure drop
  • Uniform distribution of binder solution on each single granule
  • Fluid bed with the ability to granulate soluble and hygroscopic materials
  • Fluid bed with the ability to granulate fine particles
  • A more stable, reliable, repeatable, consistent granulation
  • Very fast processing time
  • No clogging of the guns and filters
  • No product loss and high yield
  • With the majority of formulations it is possible to avoid the use of the high shear mixer and the sizing mill

Coating Pan

Rs 10 Lakh / Unit

Coating Pan
  • Material Stainless steel
  • Driven type Electric
  • Motor 5 to 10 HP
  • Weight 35 Kg
  • Diameter 48 Inch
Coating Pan

Pan : SS 316 semi ellipsoidal size pan with a circular mouth for charging & discharging of tablets Pan mounted at an inclination of 45 degrees to the horizontal.

Drive Assembly : Consists of a suitable HP 3 Phase, 440 V, 1440 RPM TEFC motor with suitable worm reduction gear box and cone pulley arrangement to give three speed output.

Hot Air Blower : The unit is provided with a hot air blower consisting of suitable HP 3 Phase 440 V, 2880 RPM TEFC electric motor & centrifugal blower with damper delivering required CFM. The air is heated by means of suitable electric heater to give air at 30 to 90 degrees Heater with thermostat control and flexible hose pipe.

Control Panel : Unit provided with suitable control panel with starters and push button to actuate the drive and for blower The circuits consists of MCCBs, relays and contractors in series Ample overload protection is provided by the MCCB and the relay Wires coming out of the connections are numbered for easy recognition.

Mounting : The motor and gear box is mounted inside sturdy MS frame and the pan mounted on the Gearing housing fitted in the stand. Blower mounted by the side of the stand or placed in remote location if required.

Finish : All joints argon Arc welded and all SS Parts polished to suitable finished required of pharmaceutical equipment MS parts painted to smooth finish.

Options Available :
  • Unit with FLP motors and FLP push button station but non FLP panel to be mounted outside FLP area,
  • Unit in SS 316 quality contact parts,
  • Unit with SS304 cladding / for GMP model and
  • Steam heating for blower.

Model overview
Loading capacity2560 -80100-120150-200250-250
Drive Motor HP 3 PH 50 C S 415 V AC line0.51257.5
RPM of Pan (empty)24 / 7212/01/3610/30/1208/24/1205/10/12
Hot air blower motor HP 3 PH 50 C/S 415 V AC line0.250.5111
Blower capacity Maximum CFM100200500750750
Heater K.W1.5 K.W3 K.W4.5 K.W6 K.W6.K.W

Send us a Quick Message

country flag

Provide Us More Details

Purpose of Requirement:

Reselling End Use Raw Material

We recommend you to enter details of your requirement to get quick quotations.
< Back
company logo

Neelam Industries