Neelam Industries Ahmedabad, Gujarat

Send SMS
Contact Us

Food Processing Plant

Continuous Steam Sterilizer

Continuous Steam Sterilizer

Approx. Rs 10 Lakh / Unit


Neelam Industries Saturated Continuous Steam Sterilizer are the most versatile steam Sterilizer designed to meet the widest requirements of the Food Industry. Sterilizer incompany a high degree of operational flexibility that enable them to be used even for a wide range of industrial and laboratory application.

Advantages Of Continuous Steam Steriliser :
The steam sterilization treatment does not use chemicals hence no chemical residual effect will be found in the treated products and therefore, it is not harmful to the health.

The main crops to be sterilized are Psyllium, Cumin, Fennel, Whole Sesame, Ground Spices and many more.

The equipment are made from SS 316. The product is sterilized with dried steam at the pre-decided temperature for specified period decided for the different crops. The product is passed through Teflon Coated Auger Conduit with zero clearance in between auger vanes and body to remove total material without sticking and accumulating on the bottom surface of the conduit.

After passing steam, the material is immediately passed in the cooling zone, the chilled water is use to cool the material.

The entire process is computerized to maintain the feed rate, steam temperature, steam pressure, steaming time, cooling temperature and cooling period.

The unit has the capacity to reduce microbiological level to zero percent depending upon the original microbiological load of the crop.

In continuous dry steam sterilization process, only heat is used to remove the germ content of the product. It is completely safe process.

Neelam Industries Continuous Steam Steriliser can treat most dry and wet products.

These include :
FEATURES :
BY PASS SCREW
Automatic switch of the product which didn't reach the target temperature. Only the treated product goes into the cooler.

Screw Conveyor

Screw Conveyor

Approx. Rs 10,000 / Unit


Screw conveyor technology is the leading conveyor technology for the widest range of material particle, bulk density and flow properties.

Dust-free in operation :
The screw conveyor is completely sealed operation air isn't used as a conveying medium, there's no risk of dust contamination or humidity from the atmosphere, In addition, the presence of dust can cause not only airborne contamination of other products, but can also pose a threat to the working environment.

Gentle handling of product :
The rotating screw , being centralised within the conveying tube, gently moves the material without degrading it. Its unique action also eliminates the risk of mixed product separation.

Screw conveyor spiral selection :
Standard Pitch, Single Flight
Conveyor screws with pitch equal to screw diameter are considered standard. They are suitable for a wide range of materials in most conventional applications.

Short Pitch, Single Flight
Flight pitch is reduced to 2/3 diameter. Recommended for inclined or vertical applications. Used in screw feeders. Shorter pitch retards flushing of materials which fluidize.

Applications… versatility across the widest range of industries.

ETO Sterilizer

ETO Sterilizer

Approx. Rs 10 Lakh / Unit


Ethylene Oxide (ETO) sterilizer is mainly used to sterilize medical and pharmaceutical products that cannot support conventional high temperature steam sterilization - such as devices that incompany electronic components, plastic packaging or plastic containers. Normally the ETO used for gas sterilization is mixed with diluents such as carbon dioxide or nitrogen in different proportions from 10 % ETO to 90 % ETO.

Features :

Emission Control Equipment
Sterilization Process Temperature and Relative Humidity Recorders

Fully Automatic PLC with Touch screen Control with all Parameter Online Printing facility, Computer Interface Facility with software and remote support facility.

Contamination Seal to prevent cross-flow of air between the clean and un-clean area.

Technique :
Most ETO sterilization lines involve three different stages. These can be separated into three different cells depending on the size or amount of devices to treat:
PRE CONDITIONING STAGE
First, products need to go through a pre conditioning phase to make micro organisms grow. The batch load goes through a dwell time under a controlled environment of:
STERILIZATION STAGE
Then the load goes through a long and complex sterilization cycle. Requirements of such a system are:
X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Food Processing Plant ?

    country-ico

    We will contact you soon !

    Nilesh Patel

    (Manager)

    Neelam Industries

    GIDC Vatwa, Ahmedabad, Gujarat, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us